• Arctic Cat Parts
  • Can-Am Parts
  • Indian Parts
  • Kawasaki Parts
  • KTM Parts
  • Polaris Parts
  • Sea-Doo Parts
  • Ski-Doo Parts
  • Suzuki Parts
  • Yamaha Parts
  • Outboard Parts

Your Parts Resource for Genuine Arctic Cat Parts

(269)381-5800

2019 Arctic Cat M 8000 HARDCORE (162)

2019 Arctic Cat M 8000 HARDCORE (162)
Medium Green
MSRP: $14,599.00
Manufacturer: Arctic Cat
Condition: New

Description

  • AWARD-WINNING ASCENDER PLATFORM WITH LIGHTWEIGHT ASCENDER BODYWORK

    The 1.125-inch dropped driveshaft features an increased track-to-tunnel clearance of 3 inches allowing us to use 8-tooth drive sprockets on this model, giving you a flatter approach angle with more floatability and maneuverability. In addition, you’ll also notice a huge difference in your sled handling. This update delivers a more efficient power transfer to the snow, letting you enjoy more horsepower when climbing, carving, side hilling and boondocking.

  • REINFORCED REAR SUSPENSION RAILS

     

  • THE HARDCORE FEATURING FOX® SHOCKS

    FOX 1.5 ZERO QS3 shocks feature three compression settings that correspond to soft, medium and firm shock calibration. A dial mounted on the remote reservoir can easily and quickly be turned to customize the compression calibration for riding conditions and intensity. They utilize a remote reservoir for fade-free performance, while coil-over springs offer a plush ride in stutter bumps. They’re standard on the skis and rear suspension of 2019 M 8000 Hardcore models.

  • 1.125" DROPPED DRIVESHAFT

    The 1.125-inch dropped driveshaft features an increased track-to-tunnel clearance of 3 inches allowing us to use 8-tooth drive sprockets on this model, giving you a flatter approach angle with more floatability and maneuverability. In addition, you’ll also notice a huge difference in your sled handling. This update delivers a more efficient power transfer to the snow, letting you enjoy more horsepower when climbing, carving, side hilling and boondocking.

  • 8000 C-TEC2 ENGINE WITH DSI

    The 8000 — efficient, responsive and fresh out of St. Cloud, Minnesota. This 2-stroke engine features noticeably faster throttle response and acceleration compared with our previous 8000, plus up to 30% reduction in oil consumption below 7000 rpm, 36% increase in low-end torque and 18% increase in midrange torque. Delivering a rare combination of increased power, reduced emissions and ultra-low oil consumption, the overall crispness sets new standards for performance and rideability in the 160-HP class.

  • ARCTIC MOUNTAIN DRIVE SYSTEM

    The Arctic Drive System features CVT drive and driven clutches for a combination of smooth shifting, optimal performance, maximum durability; great serviceability; and reduced weight. The new drive clutch features a roller bearing on the shaft that enables an auto-adjusting belt tension design and delivers consistent performance without manual adjustments. It also features a 12.5 percent lower effective starting ratio (while maintaining the top ratio) for smoother engagement and reduced belt wear at drive-away speed, with more evenly distributed force for lower belt pressure. It’s a design that’s unique to Arctic Cat.

  • ARCTIC MOUNTAIN FRONT SUSPENSION

    The AMS features mountain-specific geometry, spindles and A-arms for easy-to-maneuver handling in deep snow. Its 27-degree spindle caster angle provides optimal ski camber for off-trail cornering and more predictable counter-steering, especially when side hilling. The lightweight, forged aluminum spindles have minimal surface area, reducing drag and improving performance in deep snow. Dual-phase high-strength alloy steel A-arms are lightweight and durable.

  • FLOAT-ACTION REAR SUSPENSION

    Arctic Cat’s 2019 FLOAT-ACTION Rear Suspension has been improved by switching to two 8-inch diameter rear idler wheels and new 5.5-inch rail-mounted wheels for improved durability. Compared to models from 2015 and older, the FLOAT-ACTION suspension incorporates revised mountain-specific geometry, with longer rear-arm pull rod and revised rail profile that delivers consistent track tension during the full range of travel. A longer front-arm shock works with the pull rod for increased front-arm travel, which improves the ride performance in all conditions, especially in big bumps. The FLOAT-ACTION suspension is built in three lengths to accommodate 141-, 153- and 162-inch track lengths.

  • DELUXE DIGITAL GAUGE

    This dual configurable LCD screen gauge allows to you check all the vital information about your snowmobile and more. 14 different readings to be exact. There’s an odometer, speedometer, max RPM, 2 trip meters, engine hours, low oil light, coolant temperature, exhaust temperature, intake air temperature, battery voltage, fuel level, clock, reverse indicator, hand warmer and thumb warmer.

  • 12V OUTLET

    Need to charge your phone or another electrical device? We’ve got you covered. Just plug in and power up while you ride.

  • ALL-NEW STEALTH LIGHTWEIGHT MASTER CYLINDER BRAKE SYSTEM

    New for 2019, the Stealth lightweight master cylinder brake system features a new lever design for increased braking power with less required force compared to the previous design.

  • 153-IN. & 162-IN. POWER CLAW™ TRACK

    This lightweight, single-ply track with a 3-inch pitch sets the standard for deep-snow performance. Stagger-set, curved-forward paddle towers won’t fold over. The industry-leading 3-inch lug grips the powder like no other. Available in 153-inch and 162-inch lengths.

  • FRONT MOUNT HEAT EXCHANGER

    All M Series models incorporate the lightweight, single, front-mounted heat exchanger. The system is nearly 4 lbs. lighter than a full-length heat exchanger and results in the least amount of snow and slush retention during riding, helping the M Series maintain their real-world weight savings advantage. All M Series snowmobiles also come standard with ice-scratchers.

  • ICE SCRATCHERS

    As part of the heat exchange system, ice scratchers can save the day when there’s minimal snow but plenty of ice. In that kind of riding condition, lowering the ice scrapers kicks up ice to help prevent your engine from overheating.

  • MOUNTAIN STRAP

    Want to shift your weight? This puts the extra leverage you need right in your hands.

  • PROCLIMB - 7 G2 SKIS

    The all-new 2019 ProClimb – 7 G2 Skis feature a new shape that delivers improved flotation with a slightly less aggressive keel shape for easier steering and more consistent performance in varying snow conditions. Molded-in foot traction on the top of the skis adds boot traction and usability for experienced riders. The new G2 skis work in concert with the AMS spindles to deliver a new level of deep-snow performance and adjustability, incorporating a tapered width, from 7 inches at the tip to 6.5 inches in the middle, which works with a unique rubber dampener to keep the ski tips up and floating on top of the snow while preventing diving or knifing. A wide ski saddle accommodates a full 2 inches of lateral ski stance adjustability.

  • VERTICAL STEERING POST WITH 4.5" RISER AND MOUNTAIN HANDLEBAR

    Want to counter-steer on steep hills? This 4.5″ vertical post provides a more natural handlebar turning arc when you’re riding standing up.

Specifications

ENGINE

Type
2-stroke
Displacement (cc)
794cc
Cooling
Liquid
Cylinders
2
Bore x Stroke (mm)
85 x 70 mm
Lubrication
Electronic injection
Ignition
Digitally Controlled CDI
Engine Stator Output
270W @3000 RPM
Fuel Delivery
Dual stage injection
Exhaust
APV with tuned pipe, pipe sensor and stainless steel manifold and muffler
Fuel Capacity (gal.)
11.7
Oil System Capacity (quart)
3.25
Coolant System Capacity (quart)
5
Minimum Octane
91
 

SUSPENSION

Front Suspension
Arctic Mountain Suspension (AMS)
Ski Shocks
Fox 1.5 Zero QS3
Front Travel (in.)
7
Rear Suspension
FLOAT-ACTION Rear Suspension
Front Track Shock
Fox 1.5 Zero QS3
Rear Track Shock
Fox 1.5 Zero QSL
Rear Travel (in.)
16.5 (162)
 

DIMENSIONS

Chassis Overall Length (in.)
137.3
Chassis Overall Width (in.)
42.5-44.5
Chassis Overall Height (in.)
50
Estimated Dry Weight (lbs.)
445
Track Type
PowerClaw
Track Width (in.)
15
Track Length (in.)
153
Lug (in.)
3.00
Pitch (in.)
3.00
Ski Stance (in.)
35.5-37.5 Adjustable
Ski Type / Width (in)
ProClimb - 7 G2
Runner Type
Single runner w/carbide
 

POWERTRAIN

Drive Clutch
CVT Auto-adjusting drive clutch
Driven Clutch
CVT lightweight driven clutch
Drive System
Arctic Mountain Drive System
Brakes
Stealth Hydraulic Master Cylinder w/lightweight caliper
Clutch Calibration (ft.)
0-3000
Gearing
19/50
Chain Pitch
96
Track Drive Sprocket
8 tooth, 3.0 pitch, exvolute
Reverse
Push-button Engine
 

INSTRUMENTATION

Type of Gauge
Deluxe Digital
Speedometer
Digital
Tachometer
Digital
Odometer
Digital
Fuel
Digital
Oil
Indicator Light
Coolant
Digital/Indicator Light
Altimeter
Digital
Hours
Digital
 

KEY ITEMS

Body Plastics
Ascender
12V Outlet
Standard
Electric Start
Accessory
Front Bumper
Sport
Goggle Holder
Standard
Hand & Thumb Warmers
Standard
Handguards
Accessory
HCR-type Heat Exchanger
Standard
Headlights
LED w/ accent light
Ice Scratchers
Standard
Lightweight Brake Disc
L/W Mountain
Mirrors
Accessory
Mountain Strap
Standard
Rear Rack
Accessory
Rear Storage
Mountain Storage Bag
Seat
Lightweight Mountain
Side Panel Wind Deflectors
Accessory
Sno Pro (hooked) Brake Lever
Accessory
Steering
Vertical steering post, 4.5" riser with adjustable mountain handlebar
Tether Switch
Standard
Tow Hitch
Accessory
Tunnel Flare
Accessory
Visor Plug-ins
Accessory
Windshield
3" Mountain-height
 

All inventory listed is subject to availability and prior sale. Manufacturer's Suggested Retail Price (MSRP) if shown for a vehicle excludes set-up, freight, taxes, title, licensing or other dealer charges, and is subject to change. Individual prices may vary. Please request a quote for specific pricing.

Request Quote or More Information








Best Prices on Arctic Cat Snowmobile and ATV Parts.